电子游戏平台网址

设备中心
/ Category
变压器测试
高压试验设备
串联谐振装置
二次回路测试仪器
电缆/避雷器检测
接地/绝缘测试
电力计量/互感器校验
其他电测产品
电力监测监控仿真
蓄电池检测仪器
通讯测试/光电检测
环保环境监测仪器
推荐设备
/ Category
电子游戏平台网址
/ CONTACT US
  • 地 址:中国武汉东湖高新技术开发区 (中国光谷)
    电 话:400-6884446
    传 真:400-6884446
    邮 箱:whguozi@163.com

GOZ-BX Transformer winding deformation tester

GOZ-BX Transformer winding deformation tester
  • Transformer winding deformation tester
设备概况
    GOZ-BX transformer winding deformation tester (FRA) is for testing 6kV transformer and voltage levels above and other special purpose, by detecting amplitude-frequency response characteristics and test results vertical or horizontal comparison to determine the degree of deformation changes
    Also called: Transformer winding deformation tester, Transformer winding deformation detector, Transformer winding deformation analysis, Winding tester
 
设备图解
 
设备特性
 1. Can test without hanging hood and disassemble. 
2. Using the currently most popular sweep method. 
3. Using spilt structure, a USB or network connection between test host and the control host, plug and play. 
4. Simple field wiring, easy to use. 
5. Powerful analysis software, and software, hardware indicators meet GB DL / T911-2004 standards. 
 
Transformer winding deformation tester (FRA)’s main technical indicators:
6. Testing the host and PC interface: USB or the network. 
7. Single source: the instrument comes with a channel signal output as the sweep excitation signal; signal output is standard sine wave output and signal amplitude can be adjusted in software with max ± 10V and signal output impedance of 50Ω.
8. Two acquisition channels, a collection excitation signal, a response signal acquisition, used to calculate the transfer function. 
9. Scanning mode: linear or logarithmic distribution measurement mode. 
10. Scanning frequency accuracy: accuracy signal source output frequency is not greater than 0.01%.
11. Frequency sweep measurement: fixed mode or user-defined. 
12. Complying with national electricity industry standards: DL/T911-2004. 
 
Test and analysis software key features
13. Using windows platform, compatible with Window 2000 / Window XP / Vista / Win7. 
14. Using access database storing test data, so test data management is simple and convenient
15. Can load six curves at same time, each curve parameter calculating automatically, automatic diagnosis winding deformation, given the reference diagnostic conclusions
16. Powerful software management functions, and fully considering the needs of field use, environmental conditions automatically stored to provide the basis for the diagnosis of transformer winding deformation. Measurement data is automatically saved, with color printing capabilities, user-friendly of the test report. 
17. Software has obvious human characteristics, measured by a variety of conditions for the selection of multiple items, so in the field there is no more input, convenient using for operator.  
18. A high degree of intelligence software, after the input and the output signal connected, just press a button then you can complete all the measurements. 
19. Simple and intuitive software interface. 
设备参数
 1. The instrument can measure 6kV or above transformer.

2. Incentive-channel measurement for a fixed range±10V; response channel has several files which can automatically measure range, max input single ±25V.

3. Acquisition channel quantization precision: 12 levels.
4. Acquisition channel maximum static error: 0.5%.
5. Maximum storage capacity per channel: 64K samples.
6. The maximum sampling rate per channel: 20Msps.
7. Acquisition channel input impedance: 1MΩ.
8. Sweep measurement range: 10Hz10MHz.
9. Wide dynamic range: 100dB20dB. 

相关设备:
相关文章:
XML 地图 | Sitemap 地图